Tone sculpting has become a bit of an art, and many players pay so much attention to all facets of their board and guitar. Every link in the chain adds up to the overall tone you’re going to have coming from your amp, and small adjustments in your chain can make a big difference e in the long run.

Picks – There are thousands upon thousands of options for picks, ranging from extremely cheap budget picks all the way to expensive boutique picks that are worth almost as much as some pedals are. If you’re ever looking for a quick adjustment in your tone for something different, try a different pick shape or material. Different material will have a different tonal result on your pick attack, the harmonics and even feel of your playing. Metallic picks (using coins, etc) will have a brighter, chimey-er tone, where using some wood picks will yield a much darker tone. There are a plethora of options in terms of the material used to create them, so do your research and find which material yields the tone you’re looking for. Different thicknesses will make a large difference as well. It’s a fairly inexpensive way to for you to approach your tone differently. Also, if you don’t normally use your fingers, try it! Your fingers and fingernails have their own unique tone, and can resonate differently than a pick can. Switching up your right hand technique can really help you break out of the box tonally and technically.

Cables and Buffers – These are a foundation part of your tone, so great cables can make a huge difference. Again, there are a plethora of options out there for soldered and solderless cables, along with varying ends and methods of creating those cables, along with shielding options and types of outer casings for enhanced durability. The key to finding a great cable is finding a set that creates minimal signal degradation. The cheapo $5 patch cables can suck some tone and cut your high end, which after going through several of those cables will yield a more muffled, dull bypassed tone. Buffers also play a huge part in keeping your tone pristine. Buffers alter the impedence of your guitar signal, which helps it travel through your board easier. Just remember that some pedals (fuzzes and wah’s) aren’t fans of buffers, so place them before it. The best judge of whether you need a buffer or not is to take a short guitar cable (10’) and plug directly into your amp and play. Now plug into your board and see if the tone sounds muffled or like a blanket is lying over your amp. This would be due to signal loss from not having a buffer or needing better cables.

Speakers and Speaker Cabs – Of all of your tonal puzzle pieces, these are literally the devices that project your sound into the world, so choosing the right speaker for the application can play a huge role in turning great tone into STELLAR tone. There are more options than I can possibly put into a single blog, but there are hundreds of speakers from various companies that can accentuate the amp it’s paired with, and subsequently the pedals and guitar that are running into it.

The key to finding the perfect voicing for the sound you have in your head is realizing what you’re intentions are for the amp you’re using. If you want clean headroom, your speaker choices can differ greatly from an amp that you’re intending to use as your dirt tones. Choices can be affected by what configurations you have as well, so a single 1×12” cab will sound different from a 2×12” and a 4×12” (or 4×10”, or countless other options). Having a cab that holds more than one speaker is beneficial because it allows you to mix speakers to fit the perfect application. One speaker may be designed for more aggressive lows and highs with less emphasis on mids, where you could pair that with a more mid-focused speaker to fill out your sound tonally.

When choosing your speaker, you need to pay attention to the outputs on your amps and what ohms they can put out, as well as the speaker and make sure they match up. If you’re not sure exactly how to do this, the easiest method is to email the company and let them know what amp you’re using and they can recommend the right product and ohm rating for you. Your amp can sound completely different based on whether you’re running at 4ohm, 8ohm and 16ohm and doing the research between the various options and what works best for your amp will yield some really fun and great sounding results.

Along with proper speaker choices, deciding on the right cab (as mentioned above) will play a part in your overall tone. Horizontal cables vs. vertical cabs can make a big difference on the tone you and the audience are hearing, along with which way the cab is facing and whether it’s tilted, off the floor, or even facing a different direction. The last thing the front row of a gig wants is to have your speakers blaring directly in their faces. Tilting the cab back (on combos) or getting the cab off of the floor will help diffuse some of the sound and disperse it into the air instead of directly at the audience’s faces.

Mix it up a bit – Do you normally run your delay into the FX loop? Try placing it before your dirt pedals for a completely different set of tones. There are typical “guides” and thought processes that come to mind when laying out a pedalboard, but when it comes down to it there are no rules, and what’s right is whatever sounds best to you. Experiment with signal chain order, especially stacking different pedals into each other to see what sonic tones you can coax out of something that would seem so unorthodox.

The owner of this website has made a committment to accessibility and inclusion, please report any problems that you encounter using the contact form on this website. This site uses the WP ADA Compliance Check plugin to enhance accessibility.
0
    0
    Your Cart
    Your cart is emptyReturn to Shop