Brent Mason: Hot Wired v2

$259.97
SKU : Brent_Mason_____Hot_Wired_v2

Quick Overview

The Brent Mason Hot Wired v2. The only pedal versatile enough to be taken into the world's most demanding studio environment every day… Nashville master sessions.

The Brent Mason Hot Wired v2. The only pedal versatile enough to be taken into the world's most demanding studio environment every day… Nashville master sessions.

A lot of people think they’ve never heard of Brent Mason. We would bet that although they may not recognize the name, chances are huge that they have heard him. Brent is, without doubt, the number 1 session guitarist working out of Nashville and has been since the early 1990’s. Not only is he a legendary studio figure, but also a renowned composer and songwriter. His compositions have been used in countless films, TV shows and commercials. His solo albums, in particular “Hot Wired” (from which this pedal got its name) has become almost mythical in its reputation for guitar tone and quality of musicianship. With Brent, you will not believe it until you hear it.

Built on the foundations of the extremely popular v1, v2 stands alone in terms of versatility. The studio scene in Nashville has changed over the last few years, so we changed the Hot Wired to mirror the industry Brent works in. v1   was geared towards all out chickin’ pickin’ and beyond. Expanding on that, the v2 brings you a broader range of subtlety in channel 1. You can still find the chickin’ pickin’ tones, but you can also find a deeper, warmer overdrive section that will allow you to play as smooth as you like. With the added blend control, you won’t believe how fat your tone can be without it sounding too overdriven. Channel 2 still has the same “British Plexi” flavor that Brent loves.

Two pedals in one (overdrive and distortion), the Hot Wired is without doubt one of the most versatile pedals available today. One channel of the Hot Wired has all your overdrive needs, from a gentle break up to all out crunch, the other gives you dirt… Loads of fat, creamy distortion that is tonally perfect from top to bottom. If need be you can stack them both together for a huge, huge sound.

 

To download the full manual for the Hot Wired v2, click here  

 

Add comment


Security code
Refresh

 Technical

  •  Built in the U.S.A.
  • High grade components picked for their superior sound and response
  • Relay true bypass with soft switch
  • op mounted input and output jacks
  • Battery connection and 9v power jack
  • Power draw: Between 17mA (9v) and 28mA (18v)
  • 2 separate pedals in one box, each with their own gain structure – volume, tone, gain (clean blend on channel 1)
  • Bass boost switch on each channel (2 extra stages)
  • 4.5” x 4.5” x 1.5″ in size (114.3mm x 114.3mm x 38.1mm) – height excludes knobs and switches
  • As used by Brent Mason live and in the studio
  • Both channels can be used at the same time for ultimate “stacking” tones

 

 

CUSTOMER SATISFACTION GUARANTEE. Wampler offers a 30 day no questions asked return policy on any pedal purchased through the wamplerpedals.com website. In order to satisfy the requirements for the return the pedal must have the battery inside, complete with all original packaging and all in as new condition. Please contact us via This email address is being protected from spambots. You need JavaScript enabled to view it. to arrange (please include your order number) the return. Please note, any pedal bought through a dealer is not applicable - please refer to their specific returns policy. 

WAMPLER Pedals Limited Warranty. WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.

RETURN PROCEDURES. In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT – 3383 Gage Ave., Huntington Park, CA 90255, USA. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number.

 When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.

 INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

FOR YOUR PROTECTION. Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notification issued in accordance with the 1972 Consumer Product Safety Act.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experience radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.

CUSTOMER SUPPORT. Our dedicated staff is ready to help you with any warranty or product questions – please email us at This email address is being protected from spambots. You need JavaScript enabled to view it. or call us on (765) 352-8626

 Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: www.RegisterYourWampler.com